Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N3HG6 UN - PA9T-GF30 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 물질의 비성질 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Partially aromatic, glassfiber reinforced polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures, good long-term thermal stability and outstanding chemical resistance for highly stressed parts. The product can be characterized as compound with high toughness, stiffness, extremely low water absorption and outstanding dimensional stability. It features high flowability and allows filling of complex parts with thin wall thickness. The product is easily processable with excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, Auto E&E, sensors, pumps, fuel cell
E&E: Connectors
Consumer goods: Home appliances, consumer electronics

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.5 / *	%	ISO 294-4, 2577
성형 수축률, 수직	1.0 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	10500 / -	MPa	ISO 527
파단시 강도	190 / -	MPa	ISO 527
파단시 신율	2.5 / -	%	ISO 527
챠피 충격 강도 , +23°C	65 / -	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	60 / -	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	9 / -	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	9 / -	kJ/m²	ISO 179/1eA

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	300 / *	°C	ISO 11357-1/-3
유리 전이 온도, 10 °C/min	120 / *	°C	ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa	270 / *	°C	ISO 75-1/-2
비카트 연화 온도, B	280 / *	°C	ISO 306
두께 H인 제품의 난연성	HB / *	class	IEC 60695-11-10
테스트 두께	0.8 / *	mm	-

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	2 / *	%	ISO 62와 유사
조건에서의 흡습성	0.9 / *	%	ISO 62와 유사
밀도	1370 / -	kg/m³	ISO 1183

물질의 비성질	건조/응축	단위	시험규격
ISO 데이터
점도수	100 / *	cm³/g	ISO 307, 1157, 1628

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	120	°C	-
Pre-drying - Time	8	h	-
Processing humidity	≤0.05	%	-
용융수지온도	320 - 340	°C	-
성형온도	100 - 160	°C	-

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이), 자연 색상

특별 특성

열안정성

특성

Melt Strength, Thermal Stability

내화학성에

General Chemical Resistance

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 125 - 170 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.